partial hip meaning in Chinese
半斜屋脊
Examples
- To meet the processing requirements before sintering , the pressed briquet was pre - calcined at 1150 to make it possess adequate processing strength at first and then was shaped through precise turning on the numerical control lathe according to the design diagram of the femoral head prostheses of partial hip joint
为满足烧结前坯体加工的要求，压制后的坯体在1150预烧，使其具备一定的加工强度，然后按照半髋关节股骨头假体的形状尺寸设计图在数控车床上进行精密车削成型。 - At last , the surface of the alumina femoral head was grade - polished with sic micropowder and diamond grinding cream , the join part was trimmed with specific instrument , which made the surface of the alumina femoral head reach the degree of approximating mirror finish and match the femoral stem well . the artificial partial hip joint prostheses was finally got by articulating the alumina femoral head with ti alloy femoral stem coated with bioactive coating
最后，采用sic超细粉和金刚石研磨膏对氧化铝陶瓷股骨头表面进行分级抛光，用专用器械修整其联接部位，得到表面具有近似镜面光洁度并与股骨柄配合良好的氧化铝陶瓷股骨头，并与表面涂覆生物活性涂层的钛合金股骨柄配伍，最终获得人工半髋关节假体。 - The preparation , mechanical properties of alumina material and machining of femoral head for bioceramic - metal articulated partial hip joint prostheses were studied in this paper , which provided the research results being worth theoretical reference and practical use for the solving of technical problems of sintering and machining of alumina ceramic
本文研究高性能氧化铝生物陶瓷?金属配伍型人工半髋关节股骨头材料的制备、力学性能及假体的成型加工工艺，为解决氧化铝陶瓷烧结、机加工等技术难题提供具有一定理论参考和实际应用价值的研究结果。